Rear Door Unit Removal/Installtion

REAR DOOR UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Inner garnish (See Inner Garnish Removal/Installation)

b. Rear door trim (See Removal and Replacement)

c. Rear door speaker (See Rear Door Speaker Removal/Installation)

d. Rear door glass (See Service and Repair)

e. Inner handle (See Service and Repair)

3. Disconnect the rear door wiring harness connector. Rear Door Removal/Installation

4. Remove the tab, then remove the rear door wiring harness bracket.






5. Remove screws A and fastener.






6. Remove the rear door module.

7. Install in the reverse order of removal.