DTC Inspection - Car-Navigation System

DTC INSPECTION [CAR-NAVIGATION SYSTEM]

NOTE:
- All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio power to OFF.

3. While pressing the POWER/VOLUME switch, simultaneously press the TUNE/AUDIO switch and the DISP switch for 0.2 s or more.






NOTE:
- If several DTCs are in the memory, they can be displayed using the UP/DOWN switch.

4. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.