Clearing DTC

CLEARING DTC

1. Connect the M-MDS to the DLC-2.






2. Expose the solar radiation sensor to natural sunlight.
NOTE:
- If natural sunlight is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC "B1260, B1261".

3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Self Test".
2 Select "Modules".
3 Select "EATC".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "EATC".
3 Select "Self Test".

4. Verify the DTC according to the directions on the screen.

5. Press the clear button on the DTC screen to clear the DTC.

6. Turn the ignition switch to the LOCK position.

7. Turn the ignition switch to the ON position and wait for 5 s or more.

8. Perform DTC inspection. DTC Display

9. Verify that no DTCs are displayed.