Inspection - Instrument Cluster

DTC INSPECTION [INSTRUMENT CLUSTER]

1. Connect the M-MDS to DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Self Test".
2 Select "Modules".
3 Select "IC".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "IC".
3 Select "Self Test".

3. Verify the DTC according to the directions on the screen.

- If a DTC is displayed, repair the malfunctioning location according to the corresponding DTC inspection after recording the snap shot data. DTC Table Instrument Cluster

Snapshot data table

NOTE:
- Snapshot data items are not displayed, according to detected DTC.

Snapshot Data Table:

4. After completion of repairs, clear all DTCs stored in the instrument cluster. Clearing DTC - Instrument Cluster