Cylinder Head Assembly
Cylinder Head Installation Note1. Measure the length of each cylinder head bolt.
- Replace any cylinder head bolts that exceed the maximum length.
Cylinder head bolt length
- Standard: 144.7-145.3 mm {5.697-5.720 in}
- Maximum: 146 mm {5.74 in}
Tightening procedure
- 3.0-11 Nm {31-112 kgf-cm, 27-97 in-lbf}
- 13-17 Nm {133-173 kgf-cm, 116-150 in-lbf}
- 43-47 Nm {4.4-4.7 kgf-m, 32-34 ft-lbf}
- 88°-92°
- 88°-92°
Bolt re-usability
- Replace any cylinder head bolts that exceed the maximum length.
Camshaft Bearing Cap
Camshaft Removal Note
NOTE:
- The camshaft caps are to be kept ordered for correct reassembly in their original positions.
1. Loosen the camshaft cap bolts in two or three passes in the order shown, and remove them.
Intake Manifold Specifications
Exhaust Manifold Specifications
Camshaft Gear/Sprocket Specifications