Clearing Advanced Key

CLEARING ADVANCED KEY [ADVANCED KEYLESS ENTRY AND START SYSTEM]

1. Fully lower the driver-side door glass.

2. Connect the M-MDS to the DLC-2.






3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.

CAUTION:
- Protect the cable and body contact area with a clean rag, otherwise they could be damaged.

4. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Body".
- Select "Security".
- Select "PATS Functions".

- When using the PDS (Pocket PC)

- Select "All Tests and Calibrations".
- Select "PATS Functions".

5. Then, select items from the screen menu in the following order.

- Select "Advanced Key Code Erase and Program"

6. The security access begins and the M-MDS displays "OUT-CODE".
NOTE:
- When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".

7. Input the "IN-CODE" that corresponds to the "OUT-CODE" displayed on the M-MDS screen.

8. Perform procedures according to the directions on the M-MDS screen.

9. If the advanced key needs to be reprogrammed, program it according to the instructions on the M-MDS screen.