Programming and Relearning

DIAGNOSTIC ASSIST FUNCTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)]

Audio Unit

Software version verification

1. Launch the on-board diagnostic test mode. DTC Inspection

2. Press the SEEK/TRACK switch to display the oldest error code of the error codes that have been recorded.
NOTE:
- If an error code has not been recorded, No Err is displayed.





3. Press the SEEK/TRACK switch (up).

4. Verify the software version.






5. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.

Connection condition verification

1. Launch the on-board diagnostic test mode. DTC Inspection

2. Press SEEK/TRACK switch (up) to display the software version.






3. Press the SEEK/TRACK switch (up).

4. Verify the connected unit.






5. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.

Password reset

1. Turn ignition switch to ACC or ON position.

2. Press the PRESET switch 2 while pressing the AUTO-M switch until the password reset verification beep sound is heard.






3. Verify the "PASSWD CLEAR" is displayed in the multi information display. (Displayed is approx. 5 s.)






4. To stop the diagnostic assist mode, turn the ignition switch to the LOCK position.

With Car-navigation Unit (Without Integrated Multi Information Display)

Starting procedure

1. Turn ignition switch to ACC or ON position.

2. Turn the audio power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the TUNE/AUDIO switch for 0.2 s or more.






4. Press the "Diagnostic assist code input switch", and input the diagnostic assist code.

5. Select "ENTER".

Diagnostic assist code input screen










6. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

7. Press the POWER/VOLUME switch to release the diagnostic assist function.

Diagnostic assist code "37"connection condition verification

1. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "37".

2. Select "ENTER".





3. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

4. Press the POWER/VOLUME switch to release the diagnostic assist function.

Diagnostic assist code "38" software version verification

1. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "38".

2. Select "ENTER".





3. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

4. Press the POWER/VOLUME switch to release the diagnostic assist function.

Diagnostic assist code "39" password reset

1. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "39".

2. Select "ENTER".





3. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

4. Press the POWER/VOLUME switch to release the diagnostic assist function.