Dashboard Garnish Removal/Installation

DASHBOARD GARNISH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar lower trim (driver's side) A-Pillar Lower Trim Removal/Installation

b. A-pillar trim (driver's side) A-Pillar Trim Removal/Installation

c. Front scuff plate inner Front Scuff Plate Removal/Installation

d. Front side trim Front Side Trim Removal/Installation

e. Console panel Console Panel Removal/Installation

f. Console Console Removal/Installation

g. Hood release lever Service and Repair

h. Lower panel Lower Panel Removal/Installation

i. Meter hood Meter Hood Removal/Installation

j. Instrument cluster Removal and Replacement

k. Decoration panel Decoration Panel Removal/Installation

l. Center panel Center Panel Removal/Installation

3. Remove the screws.






4. Pull the dashboard garnish outward and detach clips A.

5. Install in the reverse order of removal.