OBD-II On-Board System Readiness Test

OBD-II ON-BOARD SYSTEM READINESS TEST [L3 WITH TC]

- This shows the OBD-II systems operating status. If any monitor function is incomplete, the M-MDS will identify which monitor function has not been completed. Misfires, Fuel System and Comprehensive Components (CCM) are continuous monitoring-type functions. The catalyst, EGR system, EVAP system and A/F sensor, HO2S will be monitored under drive cycles. The OBD-II diagnostic system is initialized by performing the DTC cancellation procedure or disconnecting the negative battery cable.