Outside Remote Mirrors - Installation

Category

14

Applicable Model/s

1983 626
Subject

INSTALLATION OF THE OUTSIDE REMOTE MIRRORS

Bulletin No.

081/83

Date Issued

2/11/83

Date Revised

Outside Remote Mirror Installation:

Description: Extra care must be taken during installation of the outside remote mirrors in order to avoid damage to the remote mirror switch. If the wire is pinched, a short circuit may occur, resulting in damage to the circuit board in the remote mirror switch.

During installation observe the following:

1. When mounting the mirror on the door, direct all the wires between the lower two mounting screw holes.

2. Tighten the mounting screws carefully. Do not allow any of the wires to become pinched between the mirror body and the door.