Doors - Wind Noise
83mazda05Category 14 087/83
7/25/83
1983 626
SUBJECT Wind Noise
DESCRIPTION A wind noise repair kit has been established for the front window glass channel of vehicles
produced before December 1982. Vehicles produced during and after December 1982 have modified glass channels installed during production.
VIN OF PRODUCTION CHANGE
Sedan: JM1GC221 D1506892 December, 1982
Hatchback: JM1GC241 D1501960 December, 1982
Coupe: JM1GC311 D1504662 December, 1982
PARTS INFORMATION
Wind Noise Repair Kit: G030 75 710
Kit Component Parts;
REPAIR PROCEDURE
To properly install the wind noise repair kit please use the following instruction.
1. Pull the glass channel out of the front and upper door window frame, but do not remove it completely.
2. Peel back the most inside fold of the glass channel and press in pad No. 1.
3. Install pad No. 2 located as shown in the illustration.
4. Install pad No. 3 to the glass channel as shown. Apply double stick tape to the outer surface of the pad so it will fit in the corner of the door window frame.
5. Install the glass channel back in the door window frame confirming that pad No. 1 is completely under the inner fold of the glass channel.
6. Raise the window glass and check to see that the glass channel and, pads fit correctly. Confirm that the window glass moves up and down smoothly.