A/C Drive Belt - Checking Procedure Manual Correction
83mazda05Category 16
177/83
3/29/83
1980-1983 RX-7
SUBJECT Corrections to 1980-1983 RX-7 Nippondenso Repair Manual
DESCRIPTION Please make the following corrections (shown underlined) to the 1980-1983 RX-7 Repair
Manual for Nippondenso Air Conditioner (P/N 9999-95-011M-80), page 61.
FIGURE VI-49:
Drive Belts
CORRECT
B) Check if the belt is worn. Adjust or replace it as necessary. Specified belt tension:
Belt deflection when pushed with 10 kg (22 lbs.) force:
Compressor drive belt:
New belt - 8-10 mm (5/16-3/8 in.) Used belt - 10-12 mm (3/8-7/16 in.)
FIGURE VI-49:
INCORRECT
B) Check if the belt is worn. Adjust or replace it as necessary. Specified belt tension:
Belt deflection when pushed with 10 kg (22 lbs.) force;
Compressor drive belt:
8-10 mm (5/16-3/8 in.)