A/C - Compressor Bracket Installation
Category 15Applicable Model/s 1983 RX-7
Subject
A/C COMPRESSOR BRACKET INSTALLATION
Bulletin No. 124/83
Issued 11/2/83
Revised
DESCRIPTION
The unthreaded portion of studs for air conditioner compressor bracket has been extended for common use of the parts with other models. Because of this change since the production date of September, 1983, it is necessary to insert plain washers between the bracket and securing nuts in order to compensate for the extended length of the studs.
VIN OF PRODUCTION CHANGE
RX-7: JM1FB331 D0762194 September, 1983
PARTS INFORMATION
Plain washers are not included in the 1983 RX-7 kits but will be in 1984. However, these washers will be available under the following part numbers.
9995 11 022 (3.2 mm, 6 pcs.) for Front Cover Stud. 9995 21 200 (2.3 mm, 2 pcs.) for Front Housing Stud.