Crankshaft Pulley - Securing Bolt Modification
Category 1Applicable Model/s 1984 626
Subject CRANKSHAFT PULLEY MODIFICATION
Bulletin No. 111/83
Issued 11/9/83
Revised 11/23/83
CRANKSHAFT TIMING BELT PULLEY ASSEMBLY:
DESCRIPTION
From September, 1983 production, the number of securing bolt for crankshaft and timing belt pulleys has been increased from 4 to 6. The reason for this change is to common use of the parts with the vehicles sold in other countries. Because of this change, the new and old parts cannot be interchangeable individually. However, the combination of both new crankshaft and timing belt pulleys can be installed on the vehicles equipped with pre-modified as replacement parts.
VIN OF PRODUCTION CHANGE
Sedan: JM1GC221 E1607843 September, 1983
Hatchback: JM1GC241 E1602404 September, 1983
Coupe: JM1GC311 E1603041 September, 1983
PARTS INFORMATION
PART NUMBER QTY
NEW OLD DESCRIPTION NEW OLD INTERCHANGEABILITY
F801 11 321B F801 11 321A Timing Belt Pulley 1 1 NO
F802 11 371A * F802 11 371 Crankshaft Pulley 1 1 NO
F801 11 375 F801 11 375 Bolt 6 4 NEW to OLD