Timing Mark - Modification
Category 1Applicable Model/s 1984 626
Subject TIMING MARK MODIFICATION
Bulletin No. 002/84
Issued 5/18/84
Revised
TIMING BELT COVER & CRANKSHAFT PULLEY:
DESCRIPTION
The timing mark on both the timing belt cover and crankshaft pulley has been changed as shown in the illustration below since the production date of October, 1983. The reason for this change is for common use of the parts with other models. Because of this change, the way to use the timing mark has also been changed.
VIN OF PRODUCTION CHANGE
Sedan: JM1GC221 E1612982 October, 1983
Hatchback: JM1GC241 E1603810 October, 1983
Coupe: JM1GC311 E1606755 October, 1983
PARTS INFORMATION
PART NUMBER
NEW OLD DESCRIPTION QTY INTERCHANGEABILITY
F801 10 501D F801 10 501C Timing Belt Cover 1 NEW to OLD
F802 11 371B F802 11 371A Crankshaft Pulley 1 NEW to OLD
GA97 69 036A GA97 69 036 Emission Label 1 NO
GA98 69 036A GA98 69 036 Emission Label 1 NO
GA99 69 036A GA99 69 036 Emission Label 1 NO
GB02 69 036A GB02 69 036 Emission Label 1 NO
OLD AND NEW TIMING MARK SETTINGS:
HOW TO USE THE TIMING MARK
New Timing Belt Cover Old Crankshaft Pulley:
Old Timing Belt Cover New Crankshaft Pulley:
Note: If the new timing belt cover or crankshaft pulley is installed onto the vehicles produced prior to this modification, please use the following procedures.