Eccentric Shaft Pulley - Installation Tips
Category 1Applicable Model/s RX-7
Subject ECCENTRIC SHAFT PULLEY
Bulletin No. 007/84
Issued 10/8/84
Revised
ECCENTRIC SHAFT PULLEY ASSEMBLY:
DESCRIPTION
No alignment dowels are provided for aligning the eccentric shaft pulley to the eccentric shaft on later model RX-7 vehicles. Consequently, the pulley may be misaligned during reinstallation, resulting in an incorrect location of the timing mark.
For this reason, whenever the eccentric shaft pulley is removed, please mark the location of the timing mark on the pulley in relation to the eccentric shaft in order that the pulley may be reinstalled correctly.