Rearview Mirror, Outside Electric - Installation
Category 15Applicable Model/s RX-7
Subject
OUTSIDE ELECTRIC REARVIEW MIRROR INSTALLATION PROCEDURES
Bulletin No. 002/84
Issued 3/16/84
Revised
DESCRIPTION
Please use the following procedures when installing the outside electric rearview mirrors on RX-7's. This will eliminate any possibility of pinching the wiring harness.
INSTALLATION PROCEDURES
1. Insert the wiring harness first through the hole in the gasket and second through the hole in the base.
2. Install the gasket and base to the door using the 2 screws provided.
3. Insert the wiring harness through the stay.
4. Install the stay to the base using the 2 screws provided.
5. Connect the wiring harness to the mirror harness.
6. Place any extra harness in the area shown. This is critical so as to keep from pinching the harness.
7. Install the mirror to the stay using the 2 screws.
8. Check for proper operation of the mirror(s).