A/C - Temperature Control Lever Binds

85mazda04

Category 14

019/85

7/16/85

1983-1985 626

SUBJECT Temperature Control Lever



DESCRIPTION

Sticky water valve may cause the bent temperature control cable. If the temperature control lever binds or operates stiffly, always check the operation of the water valve as shown below.
PARTS INFORMATION

PART NUMBER DESCRIPTION APPLIED MODEL

H002 76 434A Water Valve 626

G082 76 434A Water Valve 626 Diesel

GA97 76 522 Temperature Cable 626



CHECKING PROCEDURE

1. Disconnect the temperature control cable and rod from the water valve lever.

2. Rotate the water valve lever and check if the lever rotates smoothly. If the water valve lever does not rotate smoothly, replace the water valve.
NOTE:
The lip seal of the water valve has been modified to prevent the valve from sticking since the production date of June, 1984 (except 626 Diesel). Please refer to Service Bulletin Cat. 14, 013/85 for more information.


WARRANTY INFORMATION

Customer Comment Code: 7J
Damage Code: 83
Authorization No: B5013A
Causal Part No: H002 76 434A (626) G082 76 434A (626 Diesel)
Operation No: 76416X-R-X (Water Valve R & R) 76521X-R-X (Temperature Control Cable R & R)
Labor Hour: 0.6 Hr. (Water Valve R & R) 0.5 Hr. (Temperature Control Cable R & R)