Alignment - Toe Control Hub, Bushing

Category 13
Applicable Model/s 1986-1987 RX-7
Subject WHEEL ALIGNMENT TOE CONTROL HUB
Bulletin No. 007/86
Issued 8/28/86
Revised

Toe Control Hub Assembly:

DESCRIPTION

The toe control bushing and spacer are no longer available separately as service parts. If the toe control bushing needs to be replaced, the toe control hub, which includes both, must be replaced.

Mazda has determined that selecting the correct spacer and installing the toe control bushing is too complex for service repairs and, consequently, has decided not to make these parts available separately.

CAUTION:
When reinstalling the toe control hub, the stopper must be installed to the rear of the upper bushing (facing the yellow dot) as shown. If the stopper is incorrectly installed, improper toe control will result.
PARTS INFORMATION

PART NUMBER

NEW OLD DESCRIPTION INTERCHANGEABILITY

FB01 49 130 FB01 26 131C Toe Control Hub (R) NEW --> OLD

FB01 49 140 FB01 26 141C Toe Control Hub (L) NEW --> OLD