Tune-up and Engine Performance Checks: Technical Service Bulletins
- Recalls
- Customer Interest
- Intake Manifold - Rough Idle After Replacing Gasket
- Engine Controls - Misfire and Hesitation Over 6000 RPM
- Water Temperature Switch - Rough Idle
- Engine - Surge or Stumble During Acceleration
- Spark Plugs - Hard Start With Cold Engine
- Engine - Speed Increases Excessively at Cold Starting
- Engine - Hard Cold Start
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Intake Manifold - Rough Idle After Replacing Gasket
- Engine Controls - Misfire and Hesitation Over 6000 RPM
- Water Temperature Switch - Rough Idle
- Engine - Surge or Stumble During Acceleration
- Spark Plugs - Hard Start With Cold Engine
- Engine - Speed Increases Excessively at Cold Starting
- Engine - Hard Cold Start
- Driveability
- Loose
- Recalls
- Starting problems
- All Technical Service Bulletins
- Intake Manifold - Rough Idle After Replacing Gasket
- Coolant - Propylene Glycol Based Not Recommended
- Fuel Injector - Cleaner Kit for Improved Performance
- Engine Controls - Misfire and Hesitation Over 6000 RPM
- Water Temperature Switch - Rough Idle
- Engine - Surge or Stumble During Acceleration
- Spark Plugs - Hard Start With Cold Engine
- Engine - Troubleshooting Hard Start After Heat Soak
- Engine - Speed Increases Excessively at Cold Starting
- Spark Plugs - Cleaning Procedure
- Campaign - Spark Plug
- Engine - Hard Cold Start
- Spark Plug - Gap Modified to Increase Performance
- Tools - Correct Use of Timing Light on DLI System