EGI Control Unit - Revised to Accomodate Fuel Injectors
88mazda03 Category 4Applicable Model/s 1986-1988 RX-7
Subject EGI CONTROL UNIT & FUEL INJECTORS
Bulletin No. 049/88
Issued 5/5/88
Revised
DESCRIPTION
The high ohmic fuel injectors have been utilized since the production of 1988 RX-7 turbo, non-turbo and convertible models. Because of this change, the EGI control units have been modified and the solenoid resistor has been discontinued. Therefore, the EGI control units should not be interchanged or swapped.
CAUTION:
When troubleshooting driveability or fuel injection problems occur, do not interchange different part number EGI control units because this may damage the control unit or injector.
PARTS INFORMATION
Please refer to the following table for correct part number usage: