A/T - Driven Plate Parts Catalog Revision

89mazda04

Category Applicable Model/s

7 1986-88 RX-7
Subject AUTOMATIC TRANSMISSION Bulletin No. 061/89

DRIVEN PLATE Issued 6/6/89
Revised



DESCRIPTION

Incorrect information was established in the parts catalog and microfiche concerning 1986-1988 RX-7 automatic transmission rear clutch driven plate.

Please refer to the table below for the correct parts information.
PARTS INFORMATION


PART NUMBER DESCRIPTION THICKNESS

Incorrect 0338 19 499 Driven Plate .0784 in. (2.00 mm)

Correct FT01 19 499 Driven Plate .065 in. (1.65 mm)


Use the thinner driven plate (P/N FT01 19 499) for the 1986-88 RX-7 rear clutch.

NOTE: Front clutch uses thicker driven plate. (P/N 0338 19 499).