Brake Master Cylinder - Revised Floating Cups

87mazda05

Category Applicable Model/s Subject Bulletin No. 009/87
11 1987 MODELS BRAKE MASTER CYLINDER Issued 7/3/87
Revised




DESCRIPTION

In order to ease the assembly of the brake master cylinder, the quantity of floating cups has been changed from 2 to 1 and the configuration of the secondary cup has been changed so that it is standardized with the floating cup. This change has been made since the production of March, 1987.



When reassembling the brake master cylinder, proceed as shown below.



VIN OF PRODUCTION CHANGE



PARTS INFORMATION
NOTE:

New parts can be used as service parts on vehicles produced prior to the production change listed above.