Step 5

DISASSEMBLY-STEP 5
Disassemble in the sequence shown in the image.

Center Differential




1. Remove the bearing inner race from the center differential with a suitable pipe.

CAUTION: Hold the center differential with one hand so that it does not fall.

2. Remove the differential lock gear sleeve, differential lock hub and gear case needle bearing.
3. Remove the gear case needle bearings and differential lock thrust washer.




4. Remove the bearing inner race using a press, then remove the washer, gear case needle bearing, sun gear, planetary carrier and gear case needle bearing.

NOTE: Do not disassemble the planetary carrier assembly.




5. Remove the gear case needle bearings and spacer.




6. Remove the differential gear case sleeve.

Front Differential




1. Remove the pinion shaft.




2. Remove the side gears and pinion gears.




3. Remove the washers.