Alignment - Specifications

88mazda04

Category 30
Applicable Model/s 1988 All Models
Subject ALIGNMENT SPECIFICATIONS
Bulletin No. 004/88
Issued 2/15/88
Revised 6/16/88
DESCRIPTION

For your convenience, front and rear wheel alignment specifications for 1988 vehicles are shown in degrees/minutes and decimal degrees for use with computerized alignment systems. Minimum and maximum limits are shown in parenthesis.

The total toe specification is shown in decimal degrees. Please use this specification for computerized alignment systems in order to obtain the best accuracy. *

NOTE:
Mazda does not establish a specification for thrust angle. However, alignment equipment manufacturers recommend a value of 0 +/- 0.10~.



FRONT WHEEL ALIGNMENT *
NOTE: SAI - Steering Axis Inclination



REAR WHEEL ALIGNMENT *



FRONT WHEEL ALIGNMENT *
NOTE: SAI - Steering Axis Inclination



REAR WHEEL ALIGNMENT *
The revised sections are indicated by an asterisk. Please replace the original bulletin with this revised bulletin.