Powertrain Management: Technical Service Bulletins

• Customer Interest
  • Camshaft - Damaged or Seized
  • Fuel System - Rough Idle After Cold Start
    • Overview
    • Inspection Procedure
    • A) Installation of 3-Way Solenoid Valve (No. 2)
    • B)Installation of Control Unit No. 1
    • Parts Information
    • Warranty Information
  • Air Flow Meter - Nuts May Loosen and Enter the Engine
  • Engine - Top End Noise
• By Symptom
  • Abnormal wear/deterioration
    • Coolant - Propylene Glycol Based Not Recommended
    • Camshaft - Damaged or Seized
  • Customer Interest
    • Camshaft - Damaged or Seized
    • Fuel System - Rough Idle After Cold Start
      • Overview
      • Inspection Procedure
      • A) Installation of 3-Way Solenoid Valve (No. 2)
      • B)Installation of Control Unit No. 1
      • Parts Information
      • Warranty Information
    • Air Flow Meter - Nuts May Loosen and Enter the Engine
    • Engine - Top End Noise
  • Driveability
    • Fuel Injector - Checks for Proper Installation
    • Air Flow Meter - Nuts May Loosen and Enter the Engine
    • Fuel - Use of Regular Unleaded Gasoline
  • High emissions
    • Emission Inspection Test - Proper Preparation
  • Loose
    • Air Flow Meter Nuts - May Fall Into Engine
  • Noise
    • Engine - Top End Noise
• All Technical Service Bulletins
  • Fuel System - Fuel Ethanol Content Testing
  • Fuel System - Ethanol Fuel Usage
  • Electrical - Lightning Strike Information
  • A/T - Proper Control Unit Connection
  • Emissions - Proof of Recall Correction Certificate
  • Emission Inspection Test - Proper Preparation
  • Tools - Shipment Of NGS Program Card Version 2.0
  • Coolant - Propylene Glycol Based Not Recommended
  • Electronic Devices/Electrical - Diagnosis and Repair
    • Information
    • Section 1
    • Section 2
    • Section 3
    • Section 4
    • Section 5
  • Camshaft - Damaged or Seized
  • Fuel Injector - Checks for Proper Installation
  • EGI Control Unit - Remanufactured Exchange Program
  • EGI Control Unit - Remanufactured Parts Available
  • Fuel System - Rough Idle After Cold Start
    • Overview
    • Inspection Procedure
    • A) Installation of 3-Way Solenoid Valve (No. 2)
    • B)Installation of Control Unit No. 1
    • Parts Information
    • Warranty Information
  • Air Flow Meter Nuts - May Fall Into Engine
  • Air Flow Meter - Nuts May Loosen and Enter the Engine
  • Fuel - Use of Regular Unleaded Gasoline
  • Throttle Adjustment Screw - Adjustment Precaution
  • Year 2000 - Computer Systems Compliance
  • Star Tester - New Version Program Cards
  • Fuel Injector - Cleaner Kit for Improved Performance
  • Auto Cruise Control - O/D Cancel System Operation
  • Engine - Top End Noise
  • Fuel Volatility - Driveability Concerns
  • Fuel - California Reformulated Gasoline