A/T - Specified Manual Shift Lock Nut Torque

90mazda06 Category K
Applicable Model/s See below
Subject ATX MANUAL SHAFF LOCK NUT TORQUE

Bulletin No. 004/90
Issued 4/23/90
Revised



DESCRIPTION

When tightening the manual shaft lock nut of the automatic transaxle, be sure to tighten it with the specified torque listed below.
TIGHTENING TORQUE


1986-90 626 44-64 nm (33-47 ft. lb., 4.5-6.5 kg. cm.)
1988-89 323 44-64 nm (33-47 ft. lb., 4.5-6.5 kg. cm.)
1990 323/Protege' 31-46 nm (23-34 ft. lb., 3.2-4.7 kg. cm.)

INTORTANT NOTE:
The use of a power wrench (air or electric impact wrench) is not recommended when installing the lock nut. Reaction force applied to the shaft during installation may cause internal transaxle damage.