A/C - Wiring Harness Modification

88mazda03

Category 16
Applicable Model/s 1988 626/MX-6 ex. non-TC MTX
Subject

A/C WIRING HARNESS MODIFICATION
Bulletin No. 030/88
Issued 5/5/88
Revised



DESCRIPTION

There are two major modifications on the wire harness, which is included in the A/C kit produced after March 31, 1988. Please note these modifications because installation changes are required.



INSTALLATION CHANGE

1. White Taping:
The white tape shows the position to clamp during the pre-assembly to the relay bracket.



2. Ground Location:
The ground location has been changed from the condenser bracket to behind the headlight panel.