A/T - Rebuilt Assemblies
88mazda11Category Applicable Model/s
7 '87 & '88 626/MX-6
Turbo & Non-Turbo
Subject EC-AT REBUILD PROGRAM
Bulletin No. 051/88
Issued 9/30/88
Revised 12/30/88
DESCRIPTION
Mazda (North America), Inc. (MANA) will be supplying rebuilt EC-AT assemblies commencing October 3, 1988. MANA will be preparing these assemblies with all up-to-date modifications as described in past Service Bulletins (Category 7, no. 037/87, 038/87, 039/87, 044/88 & 045/88).
NOTE:
1. Using EC-AT tester, verify that the problem is not solenoid related and that indeed the assembly has failed.
2. Before removing the failed assembly, an "EC-AT Inspection Sheet" (supplied by MANA, see attached) should be filled out with the customer. This sheet, which should be returned with the failed unit and a copy retained with the Repair Order, contains information pertinent to this program. *
3. Refer to Mazda Parts Bulletin E-7-88 (for Western Regions) and V-32 (for Eastern Regions) for procedures required for ordering rebuilt EC-ATs and preparation regarding the return of the failed assembly PRIOR to shipping (i.e. draining instructions, parts to be removed and/or retained [see figure on page 2 of 3] and the installation of assorted plugs, brackets, holders and mounts).
4. Refer to Mazda Warranty Bulletin 072/88 (for Western Regions) and Category 7, no. 001/88 (for Eastern Regions) for terms applicable to this program. Remember, it is important that if replacement is necessary, you must contact your DSM for authorization.
MANA will supply an "EC-AT Instruction Manual" containing updated "Installation" and "Adjustment" procedures with each rebuilt unit.
NOTE: * Failure to fill out the Inspection Sheet may result in the forfeiture of the core refund.
The revised sections are indicated by an asterisk. Please replace the original bulletin with this revised bulletin.
For your convenience, the illustration below shows items which should be reinstalled on the rebuilt transmission (-) and returned (x) with the failed assembly.
EC-AT INSPECTION SHEET