Seat Belt Harness - Modification

91mazda03

Bulletin No. 013/91
Issued 8/8/91
Revised


Category S


Applicable Model/s
1988 -'91 626


Subject
PASSIVE SHOULDER BELT
DOOR SWITCH HARNESS MODIFICATION


DESCRIPTION

Replacement passive shoulder belt assemblies have a red/yellow wire from the limit switch connector. This wire plugs into the door catch connector on 1988 and '89 626 models.

Figure 1:

There is no car-side harness plug for this wire on 1990 and '91 626 models. When replacing this assembly on 1990 and '91 626's, cut the wire and tape it to prevent short circuits from occurring. Figure 1.

NOTE:
Red/yellow wire applies to 1988 and 1989 626 models only.


PARTS INFORMATION


PART NUMBER DESCRIPTON APPLICABLE
MODEL
GJ35 57 930E Right Passive Shoulder Belt Assy. 1988-'91 626, 4-Door
GJ35 57 990E Left Passive Shoulder Belt Assy. 1988-'91 626, 4-Door
GJ40 57 930E Right Passive Shoulder Belt Assy. 1988-'91 626, 5-Door
GJ40 57 990E Left Passive Shoulder Belt Assy. 1988-'91 626, 5-Door