Step 3

Disassemble in the sequence shown in the image, referring to the disassembly note for the specially marked parts.

NOTE:
a. Replace the bearings with new ones whenever they are disassembled.
b. Before disassembly, check the thrust clearance of all gears.

Disassembly Note
Bearing inner race (secondary 4th gear end)




Remove the bearing inner race and secondary 2nd gear with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Secondary 3rd gear and 2nd gear




1. Remove the retaining ring.
2. Shift the gears to 1st gear.
3. Remove the secondary 3rd gear and 2nd gear wit the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

1st gear




1. Remove the retaining ring.
2. Remove the clutch hub assembly (reverse gear) and 1st gear as shown in the image.

CAUTION: Hold the shaft with one hand so that it does not fall.

Bearing inner race (secondary shaft end)




Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Bearing inner race (4th gear end)




1. Remove the retaining ring.
2. Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Clutch hub assembly (3rd/4th)




1. Remove the retaining ring.
2. Remove the clutch hub assembly with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Bearing inner race (primary shaft end)




Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.