Engine: Technical Service Bulletins

• Customer Interest
  • Timing Belt Idler - Excessive Noise
  • HLA - Noise After Long Storage
  • Engine - Piston Slapping After Cold Start
  • Engine - Valve Train Noise
  • Engine Mount - Loose, Causes Overheating
• By Symptom
  • Abnormal wear/deterioration
    • Coolant - Propylene Glycol Based Not Recommended
    • Timing Belt Idler - Excessive Noise
  • Customer Interest
    • Timing Belt Idler - Excessive Noise
    • HLA - Noise After Long Storage
    • Engine - Piston Slapping After Cold Start
    • Engine - Valve Train Noise
    • Engine Mount - Loose, Causes Overheating
  • Noise
    • Timing Belt Idler - Excessive Noise
    • HLA - Noise After Long Storage
    • Engine - Piston Slapping After Cold Start
    • Engine - Valve Train Noise
  • Overheating
    • Engine Mount - Out of Position
• All Technical Service Bulletins
  • Coolant - Propylene Glycol Based Not Recommended
  • Engine & Alignment - Workshop Manual Revisions
  • Timing Belt Idler - Excessive Noise
  • HLA - Noise After Long Storage
  • Engine - Piston Slapping After Cold Start
  • Engine - Partial Repair Components Available
  • Engine - Valve Train Noise
  • A/T - Problems W/Aftermarket Accessories to Wired EC-AT
  • Engine Mount - Loose, Causes Overheating
  • Engine Mount - Installation
  • Engine Mount - Out of Position
  • Fuel Injector - Cleaner Kit for Improved Performance