Headlamp Set - Revised
88mazda10Category Applicable Model/s
14 1988 929
Subject:
HEADLAMP SET REPLACEMENT
Bulletin No. 062/88
Issued 11/30/88
Revised 12/26/88
DESCRIPTION
The diameter of headlamp adjust screws has been enlarged from 6 mm to 8 mm since the March 13, 1988 production.
Because of this modification, the new headlamp sets (8BHE 51 030[R], 8BHE 51 040[L]) are not interchangeable with those installed on the vehicles produced before March 13, 1988.
However, if the additional parts (listed below) which are the components of the headlamp housing are replaced with the headlamp sets, the new headlamp sets can be installed on those vehicles.
Adjust Screw - HF06 51 037
Adjuster - HF05 51 0E2
Garnish - HE21 51 0A9 *
Headlamp Screw - HF05 51 0E6 *
Headlamp Bolt - HF05 51 0F6 *
Adjuster - HF05 51 0F5 *
Adjuster Bracket - HF05 51 0E5 *
VIN OF PRODUCTION CHANGE
JM1HC221* J0124876 March 13, 1988
The revised sections are indicated by an asterisk. Please replace the original bulletin with this revised bulletin.
PARTS INFORMATION
PART NUMBER DESCRIPTION
HF06 51 037 Adjust Screw
HF05 51 0E2 Adjuster