Toe-In

FRONT

1. Loosen left and right tie rod locknuts.
2. Turn both tie rods the same amount until specified adjustment is obtained. Both tie rods have right hand threads.
3. Torque tie rod locknut to 25-29 ft.lbs. on GLC and 2 wheel drive 323 models, 25-37 ft.lbs. on 323 models with all wheel drive, 51-58 ft.lbs. on 1984-87 626, 1984-88 RX-7 and Pickup models and 1988 929, or 51-72 ft.lbs. on 1988 626 and MX-6 models.
4. If boot is twisted, loosen boot band and straighten.




REAR

Fig. 5 Rear toe in adjusting bolts. 929:

Turn left and right adjusting bolts, Fig. 5, the same amount to adjust toe in to specification. To decrease toe in turn right link bolt clockwise and left link bolt counterclockwise. To increase toe in, turn right link adjusting bolt counterclockwise and left link bolt clockwise.