Clutch Housing and Extension Housing

Disassemble Note
Clutch housing
Remove the clutch housing.




Extension housing
1. Remove the blind cover. If necessary remove the plug, gasket, spring, and pushpin.
2. Remove the cap bolt, spring, and lock ball.
3. Remove the cover, spring, and select lock spindle.




4. Remove the extension housing attaching bolts.

NOTE: Do not remove the change control case.

5. Turn the control rod in the direction of the arrow and remove the extension housing.




Under cover
Remove the under cover.




Speedometer drive gear
Remove the snap rings, speedometer drive gear, and key.