Belt Line Moulding - Revised

88mazda03

Category 14
Applicable Model/s 1988 626/MX-6
Subject BELT-LINE MOULDINGS
Bulletin No. 053/88
Issued 5/25/88
Revised



DESCRIPTION

The lip of the belt-line moulding has been re-designed to prevent the door glass from being scratched. Such scratching might result from foreign materials caught between the moulding and glass.

If you encounter this problem, replace the belt-line moulding with a new modified part. Also replace the damaged door glass at the same time.
VIN OF PRODUCTION CHANGE

626/MX-6 (Produced in Japan): JM1GD---- J1566220 February 1, 1988
MX-6 (Produced in the U.S.A.): 1YVGD31 -- J5111622 March 17, 1988



PARTS INFORMATION
NOTE:
Two types of finishes (flat black and bright plated) are used on these beltline mouldings.