Step 3

Disassemble in the sequence shown in the image referring to the disassembly note for the specially marked part.

NOTE:
a. Replace the bearings with new ones whenever they are disassembled.
b. Before disassembly, check the thrust clearance of all gears.

Disassembly Note




Primary shaft gear

Bearing (4th gear end)
Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Clutch hub assembly (3rd/4th)




Remove the 3rd gear, clutch hub assembly with the SST.

Bearing




Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Secondary shaft gear
Bearing (secondary 4th gear end)




Remove the bearing and secondary 4th gear with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

1st gear




Remove the clutch hub assembly (1st/2nd) and 1st gear with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.

Bearing




1. Set the SST to the bearing inner race as shown.




2. Remove the bearing inner race with the SST.

CAUTION: Hold the shaft with one hand so that it does not fall.