General Note

GENERAL NOTE
In the event of a problem with the EC-AT, the cause may be in the engine, EC-AT power train, hydraulic control system, or electronic control system.

When troubleshooting, therefore, it is recommended to begin from those points that can be judged quickly and easily. The recommended troubleshooting sequence is described below.
By following the above seven steps, the cause of the problem should be located.

As another guide to faster location of the causes of problems, refer to Quick Diagnosis Chart.

In this chart, a circle is used to indicate the components that might be the cause of trouble for 23 types of problems. It is only necessary to check those components indicated by circles, at each step of the troubleshooting process, in order to quickly locate the cause of the problem.