Repair and Diagnosis: Technical Service Bulletins

• How to Find Technical Service Bulletins by Category/Symptom
• Recalls
  • Recall 96V173000: Automatic Shoulder Belt Inoperative
• Customer Interest
  • Engine - Oil Leak At Rear Stationary Gear O-Ring
  • Strut, Front - Squeaking or Groaning Noise
  • HLA - Noise After Long Storage
  • Static Electricity Shock - Recommended Antistatic Sprays
  • Door Weatherstrip - Wind Noise Around Doors
    • Overview
    • Card Test
    • White Grease Test
    • Door Adjustment
  • Turbo Charger, ECU - Engine Hesitation
  • Secondary Air Bypass - Idle Speed Hunting or Fluctuation
  • Steering Wheel - Slightly Off Center.
  • Intake Manifold - Rough Idle After Replacing Gasket
  • M/T - Hard Shift In Low Temperatures
  • Suspension - Excessive Negative Rear Camber
  • Wiring Harness - Rough Idle or No Start
  • Retractor Switch - Seat Belt Lamp/Buzzer ON
  • Seat Belts - Warning Lamp/Buzzer ON
    • Overview
    • Inspection Procedure
    • Repair Procedure
  • M/T - Hard Shift to 2ND Gear After Cold Start
• Chemicals,Additives
  • Coolant - Propylene Glycol Based Not Recommended
• Manual Updates
  • HLA - Noise After Long Storage
• Seals, Gaskets
  • F00595 - 03/28/95
  • Engine, Rear Oil Seal - Prevent Damage While Assembling
• Superceded Bulletins
  • N00196 - 04/15/98
  • K00598 - 04/22/98
  • G00397 - 06/19/97
  • 407289 - 12/15/89
  • S0802297 - 12/28/97
  • ST00294 - 10/25/94
  • U00194 - 02/28/94
  • 15070-88 - 06/19/97
  • Bumper - Pre-Painting Procedures
  • Air Bags - Replacement After Deployment
  • A/C System - Tracer Dye Leak Detection
  • Brakes - Vibration, Pulsation
  • Brakes - Judder When Applying
  • M/T - Hard Shifting After Cold Weather
  • A/T Cooler/Line - Flushing Procedure
  • EGI Control Units - Replacements Now Remanufactured
  • Engine - Partial Engines Available
  • Reconditioned Anti-Freeze - Recommendations
  • Intake Manifold - Rough Idle After Gasket Replacement
• All Technical Service Bulletins
  • Interior - Console Damage Prevention During Removal
  • Fuel System - Fuel Ethanol Content Testing
  • Mirrors - Door Mirror Glass Is Loose
  • Wheels/Tires - Tire Pessure/Rotation Information
  • Mirrors - Interior Mirror Removal
  • Electrical - Lightning Strike Information
  • Wheels - Aluminum Wheel Cleaning Precautions
  • F00595 - 03/28/95
  • Special Tools - Storage Cabinet System
  • Required Tools - Inventory List
  • Tools - Shipment Of NGS Program Card Version 2.0
  • Vehicle - Proper Use of Corporate Logo
  • Tools - Using the EC/At Tester
  • Tools, Special - Modification
  • Emission Inspection Test - Proper Preparation
  • Emissions - Proof of Recall Correction Certificate
  • A/T - Proper Control Unit Connection
  • A/C - 0 Ring Replacement
  • A/C - O Ring Installation Procedure
  • A/C - O Ring Replacement
  • Oil Nozzle & Oil Metering Tube - Torque Specifications
  • Engine - Oil Leak At Rear Stationary Gear O-Ring
  • Cooling, A/T, Fuel System - Workshop Manual Corrections
    • Overview
    • 1989 Mpv Section K2 Automatic Transmission
      • Overview
      • Oil Seal On Vehicle Replacement
      • Control Valve Body - Disassembly
        • Overview
        • Overview
        • Overview
        • Installation
        • Tightening Torque Specifications
    • 1989 RX7 Section F1 Fuel System Non-Turbo
    • 1989 RX7 Section F2 Fuel System Turbo
    • 1990 Mpv Section F1 Contol System
    • 1990 Mpv Section K2 Automatic Transmission
    • 1990 626, MX-6 Section K A/T Electrical Components/Charts
    • 1991 Mpv Section K2 A/T Control Valve Body Assembly
    • 1991 626, MX-6 Section K A/T Electrical Components/Charts
    • 1991 929 Section K A/T Electrical Troubleshooting
  • Coolant - Propylene Glycol Based Not Recommended
  • Battery - Dies In A relatively Short Period Of Time
  • Electronic Devices/Electrical - Diagnosis and Repair
    • Information
    • Section 1
    • Section 2
    • Section 3
    • Section 4
    • Section 5
  • Strut, Front - Squeaking or Groaning Noise
  • HLA - Noise After Long Storage
  • Engine - Partial Repair Components Available
  • Sub Zero Starting Assist Device - Discontinued
  • Engine - Metering Oil Pump Manual Corrections
    • Overview
    • Page D-17 Metering Oil Pump 1990
    • Page D-18 Metering Oil Pump 1990
    • Page D-17 Metering Oil Pump 1989
    • Page D-18 Metering Oil Pump
  • Engine, Rear Oil Seal - Prevent Damage While Assembling
  • Engine, Rear Oil Seal - Revised to Prevent Oil Leak
  • Engine Rear Oil Seal - Damage Prevention
  • A/C - Receiver Drier Fuse Plug Elimination
  • Receiver Dryer - Replacement Criteria
  • Tire Chains - Installation Precautions
  • Bumper - Painting Preparation
  • Static Electricity Shock - Recommended Antistatic Sprays
  • Door Weatherstrip - Wind Noise Around Doors
    • Overview
    • Card Test
    • White Grease Test
    • Door Adjustment
  • EGI Control Unit - Remanufactured Exchange Program
  • EGI Control Unit - Remanufactured Parts Available
  • Turbo Charger, ECU - Engine Hesitation
  • Battery, Maintenance Free - Charging & Testing
  • Fuel - Use of Regular Unleaded Gasoline
  • Throttle Adjustment Screw - Adjustment Precaution
  • Secondary Air Bypass - Idle Speed Hunting or Fluctuation
  • Recall 96V173000: Automatic Shoulder Belt Inoperative
  • Brakes - Rotor and Drum Inspection Criteria
  • Brakes - Use On Car Brake Lathe to Correct Judder
  • Tools - Correct Use of Timing Light on DLI System
  • Horn Wiring Harness - Incorrect Routing
  • Speedometer - Replacement Procedure
  • Wiper Motor - Inoperative/Circuit Breaker Operation
  • Steering Wheel - Slightly Off Center.
  • Year 2000 - Computer Systems Compliance
  • Star Tester - New Version Program Cards
  • Hood Latch Assembly - Removal & Reinstallation
  • Coolant - Reconditioned Antifreeze, Not Recommended
  • Intake Manifold - Rough Idle After Replacing Gasket
  • A/T - Diagnostic Procedures
  • A/T - Repair Policies
    • Overview
    • Policy and Repair Process Overview
    • Warranty Repair Guide
    • Mash Authorization/Transmission Ordering
    • Core Return Preparation
    • Transmission Flushing Equipment
    • Sample Transmission Diagnostic Work Sheets
  • A/T - Engine Vacuum Testing
  • A/T - How To Use A Pressure Gauge
  • A/T - E4N71B, L4N71B, 4N71B No 4th Gear
  • A/T - N4AEL General Information
  • A/T - Intermittent Electrical Problems
  • A/T - N4AEL Erratic/Intermittant Shift Complaints
  • A/T - G4A-EL Retrieving Trouble Codes
    • Overview
    • Mazda Trouble Codes - 1987/ 626
  • A/T - Failsafe Modes
  • A/T - Drive Axle and Wheel Lug Nut Torque Specifications
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Front Bushing Wear
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Part II
  • A/T - Choosing the Right ATF
  • M/T - Hard Shift In Low Temperatures
  • M/T - Shim Adjustment Procedure
  • Drive Belt - Tension Adjustment
  • Suspension - Excessive Negative Rear Camber
  • Wiring Harness - Rough Idle or No Start
  • Fuel Injector - Cleaner Kit for Improved Performance
  • Cruise Control - Operation Revised
  • Cruise Control - OE Replacement Recommended
  • Alignment - Background Information & Specifications
  • M/T - Proper Installation of Change Rod Boot
  • Audio System - Troubleshooting
  • Retractor Switch - Seat Belt Lamp/Buzzer ON
  • Seat Belts - Warning Lamp/Buzzer ON
    • Overview
    • Inspection Procedure
    • Repair Procedure
  • Engine - Electronic Oil Metering Pump Terminals Switched
  • A/C Refrigerant - Recommendations
  • A/C - R134a Training/Equipment Requirements
  • M/T - Hard Shift to 2ND Gear After Cold Start
  • A/C - O-Ring Replacement
  • Fuel Volatility - Driveability Concerns
  • Fuel - California Reformulated Gasoline
  • Pre Alignment - Specifications
  • Wheels - Wheel Lock Installation Precautions
  • Wheels - Stain Prevention Information
  • Fuel System - Ethanol Fuel Usage