Fluid - M/T: Service and Repair
TRANSAXLE OIL REPLACEMENT1. Disconnect the speedometer cable and remove the speedometer driven gear.
2. Remove the drain plug and washer. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.
Tightening torque:
39-54 N.m (4.0-5.5 m-kg, 29-40 ft-lb)
4. Add the necessary amount of the specified oil through the speedometer driven gear mounting.
Specified Oil
Grade: API service GL-4 or GL-5
Viscosity:
All-season: DEXRON-II, M2C33-F
Or SAE 75W-90
Above -18°C (0°F) SAE 80W-90
Capacity: 2.68 liters (2.83 US qt, 2.36 Imp qt)
5. Verify the oil level is between "F" and "L".
6. Install the speedometer driven gear and connect the speedometer cable.