Control Assembly: Testing and Inspection

CONTROL PANEL INSPECTION









LED Inspection
Measure the resistance between B connector terminals using the following table.





Switch Inspection
Measure the resistance between each of the IA connector terminals using the following table when the switches are ON and OFF.





Blower Switch Inspection
(1) Turn the ignition switch ON.




(2) Measure the voltage between each of connector IA's terminals when the blower switch is operating using the following table.





Temperature Control lever Inspection
(1) Turn the ignition switch ON.
(2) Measure the voltage between each of connector IA's terminals when the T/L is operating using the following table.