Seats - Abnormal Forward and Backward Movement

90mazda01
Category Applicable Model/s

T 1988-89 929
Subject LOOSE SEAT TRACK
Bulletin No. 001/90
Issued 3/2/90
Revised



DESCRIPTION

If abnormal seat movement occurs on a vehicle -- forward movement during deceleration or braking, backward during acceleration -- please adjust the seat track according to the procedures below.



TRACK CARRIER INSPECTION/ADJUSTMENT

1. Check to see if the track carrier is loose. If it is, remove the E-ring and pin.

2. Bend the track ears in to reduce clearance and improve the fit of the carrier in the track.

NOTE:
When bending the ears, be careful not to damage the track or carrier.

3. Perform the above steps on each track.

4. Reinstall pins and E-rings and check for tightness.



TIGHTEN WORM GEAR LOCK NUTS

1. Bend lock plate back off the adjuster nut.

2. Torque adjuster nut to 10 cm-kg (8.7 ft.lbs).

3. Bend lock plates back to lock position.

4. Perform the above steps on each track.