Seat, Drivers - May Not Adjust Up or Down

9215mazda01

Bulletin No.: 020/91
Issued: 12/12/91
Revised: 12/18/91


Subject: INOPERATIVE SEAT HEIGHT ADJUSTER


Applicable Model/s: 1988-'90 626/MX-6


Category: S


DESCRIPTION

Some 626/MX-6 driver's seats may not adjust up or down. This is caused by a broken seat height adjuster.*

The height adjuster unit has been changed and included into production as of August, 1990. Vehicles having this problem that were produced prior to August, 1990 should have the new adjuster unit installed.

NOTE:
This does not effect the seat back adjustment.

VIN OF PRODUCTION CHANGE

Japan Made JM1GD****M1901140 August, 1990
USA Made 1YVGD****L5257399 August, 1990

REPAIR PROCEDURE

Replace the driver's seat adjuster unit according to procedures in Section S or 14 of your Workshop Manual.

PARTS INFORMATION

PART NUMBER DESCRIPTION APPLICABLE
MODEL

GK88 88 61XA Adjuster Unit 1988-'90 626

GJ23 88 61XA Adjuster Unit 1988-'90 MX-6


WARRANTY INFORMATION

Warranty Type Code: A
Customer Comment Code: 82
Damage Code: 9G
Part No. of Main Cause: GK88 88 61XA (626)
GJ23 88 61XA (MX-6)
Quantity: 1
Operation No./Labor Hour: S0913ARX/0.7 Hr. (one [1] seat)
S0913BRX/1.2 Hr. (two [2] seats)
NOTE:
Repairs allowed only within normal vehicle warranty coverage.


* The revised section is indicated by an asterisk. Please replace the original bulletin with this revised bulletin.