Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1990 >> Protege L4-1839cc 1.8L DOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Testing and Inspection

Control Module: Testing and Inspection


1. With ignition switch "ON," check EC-AT control unit terminal voltages, referring to pin voltage chart.
2. If not correct, check and replace or repair defective component(s) and/or wiring.
3. If voltages are not correct and no other cause is detected, replace control unit.

PIN VOLTAGE CHART

Part 1

EC-AT Control Unit Pin Voltage Chart (Part 1):






Part 2

EC-AT Control Unit Pin Voltage Chart (Part 2):




pro multis · About Operation CHARM