M/T - Hard or Grinding Noise When Shifting to Reverse

Bulletin No.
006/92*

Issued
9/22/92

Revised



Category
J*



Applicable Model/s
1990-91 Protege



Subject
HARD SHIFTING TO REVERSE (1.8L, DOHC, M/T Only)





Affected Vins

DESCRIPTION

Some vehicles may experience a grinding noise or delayed engagement when shifting to reverse. The tips of the reverse gear and reverse idler gear do not mesh properly.

Maching modifications have been made to the primary shaft reverse gear, reverse gear and reverse idler gear.

REPAIR PROCEDURE

If this condition exists, replace the parts as listed in the Parts Information. Repair procedures are outlined in Section J of the Workshop Manual.





PARTS INFORMATION



WARRANTY INFORMATION
(Applies to vehicles covered under warranty.)

Warranty Type Code:
A

Customer Comment Code:
24

Damage Code:
9M

Part No. of Main Cause:
G560 17 201D

Operation No./Labor Hour:
J0311BRX/3.6 hrs. - 1.8L, DOHC, M/T*