Front Rotor Housing

Fig. 35 Sealer Application Areas:

Fig. 36 Installing Tubular Dowels:

1. Apply sealing agent onto the front side of the front rotor housing, as shown in Fig. 35.
2. Apply petroleum jelly onto new O-ring and place the O-ring in front rotor housing.
3. Invert the front rotor housing and install it onto the front housing, being careful not to drop the sealing rubbers and O-ring.
4. Apply engine oil onto the tubular dowels and insert the tubular dowels through the front rotor housing holes into the front housing holes, as shown in Fig. 36.