Four-Wheel Drive
TRANSAXLE OIL REPLACEMENTNOTE: Park the vehicle on level ground.
1. Remove the drain plug and washer. Drain the oil into a suitable container.
2. Install a new washer and the drain plug.
Tightening torque:
39-58 N.m (4.0-6.0 m-kg, 28-43 ft-lb)
3. Add the necessary amount of the specified oil through the check plug port.
Specified oil
All-season:
ATF (DEXRON-II, M-III)
Above -18°C (0°F):
SAE 75W-90
Grade: API service GL-4
Capacity: 2.6 liters (2.7 US qt, 2.2 Imp qt)
4. Verify the oil level.
5. Install the check port plug.
TRANSFER CARRIER OIL REPLACEMENT
1. Remove the drain plug. Drain the oil into a suitable container.
2. Install a new washer and the drain plug.
Tightening torque:
39-58 N.m (4.0-6.0 m-kg, 28-43 ft-lb)
3. Add the necessary amount of the specified oil through the check plug port.
Grade : API service GL-5
Specified oil:
Above -18°C (0°F) SAE 90
Below -18°C (0°F) SAE 80W
Capacity : 0.5 liter (0.53 US qt, 0.44 Imp qt)
4. Install the check plug.
Tightening torque:
39-58 N.m (4.0-6.0 m-kg, 28-43 ft-lb)