Front Wheel Speed Sensor & Rotor
FRONT WHEEL SPEED SENSOR AND SENSOR ROTORRemoval / Installation
1. Remove in the sequence shown in the figure, referring to the Removal Note.
2. Inspect all parts and repair or replace as necessary.
3. Install in the reverse order of removal, referring to the Installation Note.
4. Tighten all nuts and bolts to the specified torque, referring to the figure.
Removal Note
Speed sensor
1. Remove the bolts and the wheel speed sensor from the knuckle.
Sensor rotor
1. Remove the front wheel hub.
2. Remove the sensor rotor from the front hub with the SST.
Installation Note
Speed sensor
1. Install the wheel-speed sensor and tighten the attaching bolt.
Tightening torque: 16 - 23 Nm (1.6 - 2.3 m.kg, 12 - 17 ft.lb)
Sensor rotor
1. Press the sensor rotor onto the hub with the SST.
Caution: Install the rotor with chamfered edge toward the hub.