Condition B

Condition B: Wind noise at rear door area. (1988-'89 models only)

LOCATION 1 (TOP REAR OF WINDOWS)

1. Lower window all the way.





2. Pull off the rear corner section of the glass run channel. Figure 15.





3. Fold up tile glass weatherstrip and install a pad as indicated by the circle in Figure 16.

Pad size:

Length

D 4-Door Sedan - 257 mm
D 5-Door Hatchback - 286 mm
Thickness - 3 mm
Width - 5 mm

4. Reinstall the glass run channel.

LOCATION 2 (MIDDLE REAR OF WINDOWS)





Install a pad on the reverse side of the corner lip
(circled area) to improve the sealing effectiveness.
Figure 17.

LOCATION 3 (REAR OF WINDOWS)








Fold the glass run channel and install a pad in area indicated by the circle. Figures 18 and 19.

Pad size:

Length (4 and 5-door) - 200 mm
Thickness - 2 mm
Width - 10 mm

LOCATION 4 (SAIL GARNISH)





Using a flat screwdriver, remove the inner sail garnish by prying it out and installing a new level inner sail garnish. Figure 20.


NOTE:
Using a flat screwdriver, pry sail garnish out of its location. Start from the lower rear corner and work forward. Also, be careful not to damage the paint on the surrounding area. Figure 20.

LOCATION 5 (REAR GLASS WEATHERSTRIP)

Perform rear door weatherstrip improvements following the same steps as used on the front door. (Condition A, Location 2)