Operation CHARM: Car repair manuals for everyone.

Body - Power Door Locks Stick

S022/92

POWER DOOR LOCKS STICK

APPLICABLE MODELS

1991 Protege

Some power door lock controllers on Protege models may stick in the up or down position. This is caused by a binding door lock controller.

Modified door lock controllers have been used on production vehicles starting November 1, 1990. Install the modified door lock controllers in vehicles produced prior to November 1, 1990 that experience this problem.

^ The door lock knob on driver's side activates door lock controllers in all doors.

^ A door lock controller that is stuck does not affect the operation of other controllers.

^ If a door lock controller is stuck, the key and door lock knob may require more force.





The modified door lock controllers are identified by the build-date. See the example of the serial number for build-date code breakdown. Figure 1.





VIN OF PRODUCTION CHANGE

JM1BG22*)*)M0235751 November 1, 1990

REPAIR PROCEDURE

1. Remove the door lock controller.

2. Install the modified door lock controller. Test the door locks.

3. Reinstall the door screen and trim panel.

PARTS INFORMATION

Warranty Type Code

A

Customer Comment Code

41

Damage Code

92

Part No. of Main Cause

BR94 58 350 or BR71 58 350, or
B456 72 350 or B456 73 350

Quantity

1

Operation No. & Labor Hour

S1011XRX 0.4 Hr. (Front)
S1111XRX 0.4 Hr. (Rear)





Disclaimer